Trade Tariff Heading: 8512
Electrical lighting or signalling equipment (excluding articles of headingĀ 8539), windscreen wipers, defrosters and demisters, of a kind used for cycles or motor vehicles
| Commodity |
Description |
Duty Rate |
Status |
Save |
| 8512200025 |
An electrical component with an integrated led, in an abs housing, with: -a voltage of 11 v or more, but not more than 15 v, -a circular shape, -2 terminals, -an outer diameter of the housing of 36 mm or more, but not more than 42.5 mm, -a diode voltage of 42 v or more, but not more than 48 v and -a current of 55 ma or more, but not more than 65 ma
|
2.00 % |
Exists in SQL |
|
| 8512200030 |
Lighting module, containing at least: - two leds, - glass or plastic lenses, focusing/scattering the light emitted by the leds, - reflectors redirecting the light emitted by the leds, in an aluminium housing with a radiator, mounted at a bracket with an actuator |
2.00 % |
Exists in SQL |
|
| 8512200060 |
Information screen displaying: -at least time, date and status of safety features in a vehicle, or -safety information on driving in the lane, blind spot, distance from the vehicle in front, current speed, speed limit, with an operating voltage of 12 v or more but not more than 14.4 v, of a kind used in the manufacturing of goods of chapter 87 |
2.00 % |
Exists in SQL |
|
| 8512200070 |
Electrical component with light guide integrated with led, for motor vehicles with: -two parallel ribs in the front area with a distance between them of 1.4 mm or more but not more than 1.8 mm, -four holes with the dimension of 7.3 mm or more but not more than 7.9 mm in the short direction of the guide, and -a 3 pines connector, for use in the manufacture of automotive components |
2.00 % |
Exists in SQL |
|
| 8512200080 |
Grab handle light with integrated led, for motor vehicles: -a distance between integrated spring clip and surface of 0.85 mm or more but not more than 1.85 mm, -a length of the housing to two front vertical ribs of 26.45 mm or more but not more than 26.75 mm, and -four horizontal ribs where the distance on the lower area over the base radia between the two is 18.5 mm or more but not more than 18.7 mm, for use in the manufacture of automotive components |
2.00 % |
Exists in SQL |
|
| 8512200090 |
Other |
2.00 % |
Exists in SQL |
|
No match found for 8512200040 so setting active to 0 !!!
No match found for 8512309010 so setting active to 0 !!!
No match found for 8512309030 so setting active to 0 !!!
No match found for 8512309040 so setting active to 0 !!!
API source