| Commodity |
Description |
Duty Rate |
Status |
Save |
| 8501310010 |
Motors of an output exceeding 735 w, dc generators, for use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8501310020 |
For use in certain types of aircraft |
0.00 % |
Exists in SQL |
|
| 8501310045 |
Dc motors, brushless, with:
- an external diameter of 90 mm or more, but not more than 110 mm,
- a rated speed of not more than 3 680 rpm,
- an output of 600 w or more but not more than 740 w at 2 300 rpm and at 80 °c,
- a supply voltage of 12 v,
- a torque of not more than 5.67 nm,
- a rotor position sensor,
- an electronic star-point relay, and
- for use with an electric power steering control module
|
0.00 % |
Exists in SQL |
|
| 8501310047 |
Motor for automotive electric seat adjustment applications: -with a shaft output on both motor sides, -consisting of a permanently excited dc motor, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with hall effect sensor, -with a nominal voltage of 8 v or more but not more than 16 v, -with a rated output mechanical power not exceeding 120 w, and -with a specified temperature range from -40 °c to 160 °c, for use in the manufacture of automotive components for car''s seats |
0.00 % |
Exists in SQL |
|
| 8501310048 |
Brushless dc electric motors:
-with a rated power of 240 w or more, but not more than 260 w,
-with a voltage of 36 v or higher, but not higher than 52 v
-with a torque of 20 nm or more, but not more than 140 nm,
-with a housing made of aluminum, aluminum alloy or plastic,
-with or without a built-in controller,
-with a communication function in the lin or uart interface,
-weighing 1.5 kg or more, but not more than 5.0 kg,
-adapted for mounting in a bicycle frame
for use in the manufacture of e-bikes |
0.00 % |
Exists in SQL |
|
| 8501310049 |
Brushless dc electric motors:
- with a rated power of 240 w or more, but not more than 260 w,
- with a voltage of 24 v or higher, but not higher than 52 v,
- with a torque of 30 nm or more, but not more than 62 nm,
- with a lin, uart or can communication interface,
- with an internal planetary gearbox with fixed or variable ratio or direct drive,
- with a housing made of aluminum or aluminium alloy,
- with a weight of 1.5kg or more, but not more than 6kg,
- adapted for mounting in the front or rear bicycle wheel,
for use in the manufacture of e-bikes
|
0.00 % |
Exists in SQL |
|
| 8501310050 |
Dc motors, brushless, with:
- an external diameter of 80 mm or more, but not more than 200 mm,
- a supply voltage of 4 v or more, but not more than 16 v,
- an output at 20 °c of 200 w or more, but not more than 750 w,
- a torque at 20 °c of 2.00 nm or more, but not more than 7.00 nm,
- a rated speed at 20 °c of 600 rpm or more, but not more than 3 100 rpm,
- with or without a pulley,
- with or without an electronic power steering sensor/controller |
0.00 % |
Exists in SQL |
|
| 8501310052 |
Electric brushless direct current motor finished with biocompatible materials such as stainless steel according to specification 17-4 ph or type 303, 316l, 400 with:
-a three-phase winding,
-an output power not exceeding 280 w,
-a length with gearhead of 116.1 mm or more but not more than 117.2 mm,
-an external diameter of 13.86 mm or more but no more than 13.92 mm,
-a maximum torque of motor with gearhead 246.6 mnm in 25℃,
-a no-load radial speed of motor with gearhead with 9 900 rpm, at 24v in 25°c,
-a weight of motor with gearhead of 70.5 g or more but not more than 71.5 g, a resistance to peak temperature of 140°c or more (non-operating), a maximal air leak between shaft and shaft seals of 15 pa/s at given 2 bars of pressure,
-14 functional pins for power and control purpose,
-a flexible printed circuit with length of 245 mm but no longer than 255 mm with mounted 8 pin male connector
for use in the manufacture of medical devices with right-left rotation and oscillation function |
0.00 % |
Exists in SQL |
|
| 8501310054 |
Brushless dc electric motor, with:
-a rated voltage of 310 v,
-a rated power of 350 w or more but not more than 368 w,
-an input power of 500 w or more but not more than 550 w,
-output power of 350 w or more but not more than 400 w,
-an external diameter without bracket connector and pulley of 143.2 mm or more but not more than 143.8 mm,
-a rated speed of 16300 rpm or more but not more than 16500 rpm,
-a weight of 2.33 kg or more but not more than 2.40 kg,
-a pulley
|
0.00 % |
Exists in SQL |
|
| 8501310055 |
Dc motor with or without commutator, for driving hand-held power tools, lawn mowers or home appliances, with:
-an external diameter of 24.2 mm or more, but not more than 140 mm,
-a rated speed of 3300 rpm or more, but not more than 26200 rpm,
-a rated supply voltage of 3.6 v or more, but not more than 230 v,
-an output power of more than 37.5 w , but not more than 2400 w,
-a free load current of not more than 20.1 a,
-a maximum efficiency of 50% or more, |
0.00 % |
Exists in SQL |
|
| 8501310058 |
Permanently excited dc motor with:
-an external diameter of 27 mm or more but not more than 90 mm, including mounting flange,
-a rated speed of not more than 25 000 rpm,
-an output of 45 w or more but not more than 400 w, and
-a supply voltage of 9 v or more but not more than 50 v,
-whether or not a multiple-phase winding,
-whether or not with a drive disc,
-whether or not with a crankcase,
-whether or not with a fan,
-whether or not with a cap assembly,
-whether or not with a sun gear,
-whether or not with a speed and rotational direction encoder,
-whether or not with or without a speed or rotational direction sensor of resolver type or hall effect type,
-whether or not with a mounting flange
for use in the manufacture of air suspension seats in tractors, earthmoving machines and forklifts or for use in the manufacture of actuators for height-adjustable furniture
|
0.00 % |
Exists in SQL |
|
| 8501310063 |
Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct current motor with:
- a specified speed of not more than 6000rpm,
- a minimum output of 400w, but not more than 1.3kw (at 12 v), or with a minimum output of 750w but not more than 1.55kw (at 36 v),
- a flange diameter of 85mm or more but not more than 200mm,
- a maximum length of 335mm, measured from the beginning of the shaft to the outer ending,
- a housing length of not more than 265mm, measured from the flange to the outer ending,
- a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an o-ring and grease),
- a stator with single t-tooth design and single coil windings in 9/6 or 12/8 or 12/10 topology, and
- surface magnets,
- whether or not with electronic power steering controller,
- whether or not with pulley or coupling,
- whether or not with rotor position sensor
|
0.00 % |
Exists in SQL |
|
| 8501310068 |
Camshaft actuator for controlling the timing of valve opening by using electromotor in a continuous variable valve timing system of an internal combustion piston engine, of:
-a length of 110 mm or more but not more than 140 mm,
-a width of 90 mm or more but not more than 130 mm,
-a height of 80 mm or more but not more than 110 mm
for use in the manufacture of engines of motor vehicles |
0.00 % |
Exists in SQL |
|
| 8501310085 |
Power transmission device for controlling the output of exhaust gas turbochargers, consisting of:
- a dc motor of an output not exceeding 600 w,
- for usage with a supply voltage of 8 v or more but no more than 48 v,
- with motor connection (plug-in connection),
- whether or not with position sensor,
- whether or not with integrated control and power electronics,
- whether or not with spring mechanism for resetting the lever,
- built in a housing with reduction gear and lever attached to the motor drive shaft, or
- built in a housing with threads integrated into the rotor of the motor for linear movement of the integrated control rod
|
0.00 % |
Exists in SQL |
|
| 8501310099 |
Other |
0.00 % |
Exists in SQL |
|
