| Commodity |
Description |
Duty Rate |
Status |
Save |
| 8501101010 |
For use in certain types of aircraft |
0.00 % |
Exists in SQL |
|
| 8501101020 |
Synchronous motor for a dishwasher with a water flow control mechanism with
- a length without axle of 24 mm (+/- 0.3),
- a diameter of 49.3 mm (+/- 0.3)
- a rated voltage of 220 v ac or more but not more than 240 v ac,
- a rated frequency of 50 hz or more but not more than 60 hz,
- an input power of not more than 4 w,
- a rotation speed of 4rpm or more but not more than 4.8rpm,
- an output torque of not less than 10kgf/cm
|
0.00 % |
Exists in SQL |
|
| 8501101040 |
Synchronous hybrid stepper motor with:
-an output not exceeding 18 w,
-two phases,
-a rated current of not more than 2.5 a/phase,
-a rated voltage of not more than 20 v,
-with or without a threaded shaft,
for use in the manufacture of 3d printers |
0.00 % |
Exists in SQL |
|
| 8501101050 |
Linear actuator for automotive electric seat adjustment applications: -consisting of a permanently excited dc motor with an integrated gear mechanism and leadscrew, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with hall effect sensor, -with a nominal voltage of 8 v or higher but not higher than 16 v, -with a rated output mechanical power not exceeding 20 w, and -with a specified temperature range from -40 °c to 160 °c, for use in the manufacture of automotive components for car''s seats |
0.00 % |
Exists in SQL |
|
| 8501101060 |
Rotary actuator for automotive electric seat adjustment applications: -consisting of a permanently excited dc motor with an integrated gear mechanism, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with hall effect sensor, -with a nominal voltage of 8 v or more but not more than 16 v, -with a rated output mechanical power not exceeding 35 w, and -with a specified temperature range from -40 °c to 160 °c, for use in the manufacture of automotive components for car''s seats |
0.00 % |
Exists in SQL |
|
| 8501101070 |
Electric controller for blinds of cooler, with an operating dc voltage of 9 v or more but not more than 16 v and a maximum power of less than 18 w, containing at least:
-a printed circuit board,
-an electric stepper motor,
-a connector,
-a plastic cover,
for use in the manufacture of goods of chapter 87 |
0.00 % |
Exists in SQL |
|
| 8501101090 |
Other |
0.00 % |
Exists in SQL |
|
| 8501109110 |
For use in certain types of aircraft |
0.00 % |
Exists in SQL |
|
| 8501109190 |
Other |
0.00 % |
Exists in SQL |
|
| 8501109310 |
For use in certain types of aircraft |
0.00 % |
Exists in SQL |
|
| 8501109390 |
Other |
0.00 % |
Exists in SQL |
|
| 8501109910 |
For use in certain types of aircraft |
0.00 % |
Exists in SQL |
|
| 8501109920 |
Worm axis motor for automotive electric seat adjustment applications: -consisting of a permanently excited dc motor with a worm wheel, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with hall effect sensor, -with a nominal voltage of 8 v or more but not more than 16 v, -with a rated output mechanical power not exceeding 35 w, and -with a specified temperature range from -40 °c to 160 °c, for use in the manufacture of automotive components for car''s seats |
0.00 % |
Exists in SQL |
|
| 8501109930 |
Linear actuator for automotive electric seat adjustment applications: -consisting of a permanently excited dc motor with an integrated gear mechanism and leadscrew, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with hall effect sensor, -with a nominal voltage of 8 v or higher but not higher than 16 v, -with a rated output mechanical power not exceeding 20 w, and -with a specified temperature range from -40 °c to 160 °c, for use in the manufacture of automotive components for car''s seats |
0.00 % |
Exists in SQL |
|
| 8501109940 |
Rotary actuator for automotive electric seat adjustment applications: -consisting of a permanently excited dc motor with an integrated gear mechanism, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with hall effect sensor, -with a nominal voltage of 8 v or more but not more than 16 v, -with a rated output mechanical power not exceeding 35 w, and -with a specified temperature range from -40 °c to 160 °c, for use in the manufacture of automotive components for car''s seats |
0.00 % |
Exists in SQL |
|
| 8501109950 |
Electric (dc) motor powering height adjusting with:
-a rated output mechanical power not exceeding 35 w,
-frame integration with a length of 156 mm, a height of 59 mm, a thickness of 36 mm and a weight of 500 g,
-a stall torque of 45 nm and ultimate torque of 200 nm,
-a maximum current of 15 a,
-no load speed of 7 rpm or more but not more than 10 rpm,
-a rotation speed of 4 000 rpm or more but not more than 5 600 rpm,
-a maximum noise level of 42 db(a),
-a maximum angular backlash up to 3 degrees, and
-a 8 tooth pinion module,
for use in the manufacture of automotive components for car''s seats |
0.00 % |
Exists in SQL |
|
| 8501109956 |
Dc motor:
- with a speed rotation of not more than 7 000 rpm without load,
- with a nominal voltage of not more than 18 v,
- with a maximum power of 24 w,
- for a specific temperature range from -40°c to 160°c,
- with or without a gear connection,
- with or without a mechanical attachment interface,
- with 2 electrical connections,
- with a maximum torque of 100 nm |
0.00 % |
Exists in SQL |
|
| 8501109958 |
Dc motor :
- with a speed rotation of not more than 6500 rpm (without load),
- with a nominal voltage of 12 v (± 4 v),
- with a maximal power below than 20 w,
- with a specified temperature range from -40°c to 160°c,
- with a worm gear drive,
- with a mechanical attachment interface,
- with 2 electrical connections,
- with a maximum torque of 75 nm
|
0.00 % |
Exists in SQL |
|
| 8501109960 |
Dc motor
- with a rotor speed of 3 500 rpm or more but not more than 5 000 rpm loaded and not more than 6 500 rpm when not loaded
- with a power supply voltage of 100 v or more but not more than 240 v
for use in the manufacture of electric fryers |
0.00 % |
Exists in SQL |
|
| 8501109964 |
Dc motor to control angular position of the flap to adjust gas flow in the air throttle and egr valve:
-with ingress protection (ip) standard of ip69,
-with a rotor speed of not more than 6 500 rpm when not loaded,
-with a rated voltage of 12.0 v (± 0.1),
-of a specified temperature range of - 40 °c or more but not more than 165 °c,
-with or without a connecting pinion,
-with or without an engine connector,
-with or without a flange,
-with a diameter of not more than 40 mm (not including the flange),
-with an overall height of not more than 90 mm (from the base to the pinion)
|
0.00 % |
Exists in SQL |
|
| 8501109965 |
Electric turbocharger actuator, with:
- a dc motor,
- an integrated gear mechanism,
- a (pulling)force of 200 n or more at a minimum of 140°c elevated ambient temperature,
- a (pulling) force of 250 n or more in each position of its stroke,
- an effective stroke of 15 mm or more but not more than 25 mm,
- with or without an on-board diagnostics interface
|
0.00 % |
Exists in SQL |
|
| 8501109970 |
Dc stepping motor, with - a two-phase winding, - a rated voltage of 9 v or more, but not more than 16.0 v - of a specified temperature range covering at least - 40 degc to + 105 degc - with or without connecting pinion - with or without motor drive connector |
0.00 % |
Exists in SQL |
|
| 8501109975 |
Permanently excited dc motor with
- a multiple-phase winding,
- an external diameter of 24 mm or more but not more than 38 mm,
- a rated speed of not more than 12 000 rpm,
- a power supply voltage of 8 v or more but not more than 27 v,
- with or without a pulley,
- with or without a gear wheel |
0.00 % |
Exists in SQL |
|
| 8501109979 |
Dc motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm or a pinion, of a specified temperature range covering at least - 20°c to + 70°c |
0.00 % |
Exists in SQL |
|
| 8501109990 |
Other |
0.00 % |
Exists in SQL |
|
