Trade Tariff Heading: 8483
Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints)
| Commodity |
Description |
Duty Rate |
Status |
Save |
| 8483902010 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8483902090 |
Other |
0.00 % |
Exists in SQL |
|
| 8483908110 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8483908190 |
Other |
0.00 % |
Exists in SQL |
|
| 8483908910 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8483908920 |
Sprocket for continuous variable valve timing to optimize the process of filling the cylinders of an internal combustion engine with:
-case,
-rotor,
-at least 4 screws,
-spring,
-of an external diameter of 80 mm or more but not exceeding 95 mm,
-of a thickness of 25 mm or more but not more than 35 mm,
for use in the manufacture of engines of motor vehicles |
0.00 % |
Exists in SQL |
|
| 8483908930 |
Forged steel sprockets with external toothing, whether or not with internal splines in a diametral pitch standard, with:
-a diameter of 400 mm or more, but not more than 630 mm,
-7 teeth or more, but not more than 15 teeth,
-a tooth core hardness of 28 hrc or more, but not more than 45 hrc,
-a tooth surface hardness of 50 hrc or more, but not more than 60 hrc,
-whether or not, a spline hardness of 30 hrc or more, but not more than 45 hrc,
-an effective carburised case depth of 4 mm or more, but not more than 5 mm |
0.00 % |
Exists in SQL |
|
| 8483908940 |
Steel alloy gear wheels with straight teeth and involute profile, with:
-external and/or internal toothing in a diametral pitch standard,
-a diameter of 35 mm or more, but not more than 600 mm,
-13 teeth or more, but not more than 80 teeth,
-a tooth core hardness of 28 hrc or more, but not more than 45 hrc,
-a tooth surface hardness of 50 hrc or more, but not more than 65 hrc,
-an effective carburised case depth of 1.00 mm or more, but not more than 3.1 mm,
-a spline hardness of 27 hrc or more, but not more than 62 hrc,
-whether or not in combination with a shaft with a spline hardness of 27 hrc or more, but not more than 62 hrc |
0.00 % |
Exists in SQL |
|
| 8483908990 |
Other |
0.00 % |
Exists in SQL |
|
No match found for 8483405120 so setting active to 0 !!!
API source
