Trade Tariff Heading: 8483
Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints)
| Commodity |
Description |
Duty Rate |
Status |
Save |
| 8483402110 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8483402190 |
Other |
0.00 % |
Exists in SQL |
|
| 8483402310 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8483402320 |
Bevel gear:
-made of lightweight alloys and steel,
-built on straight or helical bevel gears,
-with an angle between the shafts of 30 degrees or more but not more than 90 degrees
-with a gear 1:1.3 ratio or more but not more than 1:1.46,
for use in the manufacture of grass trimmers, brushcutters and other types of garden machinery |
0.00 % |
Exists in SQL |
|
| 8483402330 |
Bevel gear:
-made of lightweight alloys and steel,
-built on straight bevel gears,
-with an angle between the shafts of 24 degrees or more but not more than 35 degrees,
for use in the manufacture of grass trimmers, brushcutters and other types of garden machinery |
0.00 % |
Exists in SQL |
|
| 8483402390 |
Other |
0.00 % |
Exists in SQL |
|
| 8483402510 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8483402520 |
Worm gearbox
-in an aluminium alloy housing,
-with a plastic or steel worm,
-with mounting holes,
-with a 90 degree reversible drive direction,
-with a 4:19 transmission ratio,
-equipped with a lead screw with a length of 310 mm or more but not more than 380 mm,
-with a guide nut incorporated into the assembly bracket,
-with or without a lead screw support,
for indirect connection to the drive motor of a car seat guide system |
0.00 % |
Exists in SQL |
|
| 8483402590 |
Other |
0.00 % |
Exists in SQL |
|
| 8483402910 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8483402950 |
Gear set of cycloid gear type with:
- a rated torque of 50 nm or more but not more than 9 000 nm,
- standard ratios of 1:50 or more but not more than 1:475,
- lost motion of not more than one arc minute,
- an efficiency of more than 80%
of a kind used in robot arms
|
0.00 % |
Exists in SQL |
|
| 8483402960 |
Epicyclic gearing, of a kind used in driving hand-held power tools with:
- a rated torque of 25 nm or more, but not more than 70 nm,
- standard gear ratios of 1:12.7 or more, but not more than 1:65.3 |
0.00 % |
Exists in SQL |
|
| 8483402970 |
Cast steel planetary cage, with:
-external or internal toothing in a diametral pitch standard,
-27 teeth or more, but not more than 70 teeth,
-a diameter of 300 mm or more, but not more than 725 mm,
-a length of 225 mm or more, but not more than 800 mm,
-3 or 4 planetary gears,
-a hardness of 40 hrc or more, but not more than 45 hrc |
0.00 % |
Exists in SQL |
|
| 8483402989 |
Other |
0.00 % |
Exists in SQL |
|
| 8483403010 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8483403090 |
Other |
0.00 % |
Exists in SQL |
|
| 8483405110 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8483405190 |
Other |
0.00 % |
Exists in SQL |
|
| 8483405910 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8483405930 |
Hydrostatic speed changer:
-with a hydro pump and a differential with wheel axle,
-whether or not with a fan impeller and/or a pulley,
for use in the manufacture of lawn mowers of subheadings 8433 11 and 8433 19 or other mowers of subheading 8433 20 |
0.00 % |
Exists in SQL |
|
| 8483405990 |
Other |
0.00 % |
Exists in SQL |
|
| 8483409010 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8483409080 |
Transmission gearbox, with:
- not more than 3 gears,
- an automatic deceleration system and
- a power reversal system,
for use in the manufacture of goods of heading 8427 |
0.00 % |
Exists in SQL |
|
| 8483409099 |
Other |
0.00 % |
Exists in SQL |
|
No match found for 8483405120 so setting active to 0 !!!
API source
