Trade Tariff Heading: 8483
Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints)
| Commodity |
Description |
Duty Rate |
Status |
Save |
| 8483102110 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8483102190 |
Other |
4.00 % |
Exists in SQL |
|
| 8483102510 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8483102590 |
Other |
4.00 % |
Exists in SQL |
|
| 8483102910 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8483102990 |
Other |
4.00 % |
Exists in SQL |
|
| 8483105010 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8483105090 |
Other |
4.00 % |
Exists in SQL |
|
| 8483109510 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8483109530 |
Steel alloy splined shaft (torque shaft) with straight teeth and involute profile, with:
-external toothing in a diametral pitch standard,
-17 teeth or more, but not more than 50 teeth,
-a diameter of 35 mm or more, but not more than 145 mm,
-a length of 200 mm or more, but not more than 1345 mm,
-a hardness of 35 hrc or more, but not more than 45 hrc |
4.00 % |
Exists in SQL |
|
| 8483109540 |
Stepped shaft made of carbon steel with:
-rolled, involute profiled, splined shaft end, the helix angle of which is at least 0°15.5'' but not more than 0° 21.5'',
-a largest diameter of 16 mm or more, but not more than 18 mm,
-a length of 137 mm or more, but not more than 155 mm,
-a weight of 0.12 kg or more, but not more than 0.28 kg
|
4.00 % |
Exists in SQL |
|
| 8483109550 |
Drum shaft for torque transmission, in steel (to sm45c for shaft standard and sts430 for ring standard) with:
-a length of 137.8 mm or more but not more than 138.2 mm,
-an outer diameter of 23 mm or more but not more than 48.025 mm,
-a weight of 1.0245 kg or more but not more than 1.0445 kg,
-a hardness of the shaft of 40 or more on the rockwell c hardness scale (hrc), but not more than 50 hrc,
-a ring hardness of 90 or more on the rockwell b hardness scale (hrb), but not more than 120 hrb,
-an external 37-teeth spline with major diameter of 41 mm or more but not more than 48 mm
|
4.00 % |
Exists in SQL |
|
| 8483109590 |
Other |
4.00 % |
Exists in SQL |
|
No match found for 8483405120 so setting active to 0 !!!
API source
