Trade Tariff Heading: 8503
Parts suitable for use solely or principally with the machines of heading 8501 or 8502
| Commodity |
Description |
Duty Rate |
Status |
Save |
| 8503001010 |
For use in certain types of aircraft |
2.00 % |
Exists in SQL |
|
| 8503001090 |
Other |
2.00 % |
Exists in SQL |
|
| 8503002010 |
For use in certain types of aircraft |
2.00 % |
Exists in SQL |
|
| 8503002090 |
Other |
2.00 % |
Exists in SQL |
|
| 8503009110 |
For use in certain types of aircraft |
2.00 % |
Exists in SQL |
|
| 8503009131 |
Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing |
2.00 % |
Exists in SQL |
|
| 8503009199 |
Other |
2.00 % |
Exists in SQL |
|
| 8503009810 |
For use in certain types of aircraft |
2.00 % |
Exists in SQL |
|
| 8503009832 |
Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing |
2.00 % |
Exists in SQL |
|
| 8503009833 |
Stator for brushless motor of electrical power steering with a roundness tolerance of 50 μm |
2.00 % |
Exists in SQL |
|
| 8503009837 |
Rotor for electric motor, with the rotor cylindrical body made of agglomerated ferrite or sintered neodymium or plastoneodymium, with or without metal shaft and with or without plastic elements:
- diameter of the rotor body of 15mm or more but not more than 37mm,
- length of the rotor body of 12mm or more but not more than 36mm
|
2.00 % |
Exists in SQL |
|
| 8503009840 |
Pressure casted inner housing of a cooling channel system for an electrical motor:
-of en ac-47100 aluminum,
-shot-blasted and machined,
-leakproof to the degree of 3 ml per minute or less under 2.75 bar pressure,
-with a hardness of 70 or more on the hardness brinell wolfram (hbw) scale (2.5/62.5, according to iso 6506),
-with a tensile strength of 190 n/mm² or more,
-with a height of 160 mm or more, but not more than 330 mm,
-with a diameter of 240 mm or more, but not more than 368 mm,
-with a weight of 3 kg or more, but not more than 5.84 kg
|
2.00 % |
Exists in SQL |
|
| 8503009843 |
Silicone or plastic keyboards, comprising:
-parts of common metal, and
-whether or not comprising parts of plastic,
-epoxy resin reinforced with fiberglass or wood,
-whether or not printed or surface-treated,
-with or without electrical conductors
-with or without a membrane bonded to the keyboard,
-with or without mono or multilayer protective film
|
2.00 % |
Exists in SQL |
|
| 8503009853 |
Pressure casted rotor cover of the cooling channel system in the electrical motor:
- of en ac-47100-f aluminum,
- with a sealing cap of stainless steel,
- shot-blasted and machined,
- leakproof to the degree of 1ml per minute or less under 2.75 bar pressure,
- with a hardness of 70 hbw or more (2.5/62.5, according to iso 6506),
- with a tensile strength of 190 n/mm² or more,
- with a height of 42mm or more, but not more than 64mm,
- with a diameter of 88mm or more, but not more than 132mm,
- with a weight of 0.3kg or more, but not more than 0.5kg
|
2.00 % |
Exists in SQL |
|
| 8503009855 |
Stator for brushless motor, with:
-an internal diameter of 206.6 mm (± 0.5)
-an external diameter of 265.0 mm (± 0.2) and
-a width of 37.2 mm or more but not more than 47.8 mm
of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums |
2.00 % |
Exists in SQL |
|
| 8503009863 |
Pressure casted outer housing of an electrical motor:
- of en ac-47100 aluminum,
- with or without overmolded bearing sleeves of martensitic stainless steel and assembled sealing caps of stainless steel,
- shot-blasted and machined,
- with or without a rotor chamber, leakproof to the degree of 3 ml per minute or less under 2.75 bar pressure,
- with a hardness of 70 or more on the hardness brinell wolfram (hbw) scale (2.5/62.5, according to iso 6506),
- with a tensile strength of 190 n/mm² or more,
- with a height of 195mm or more, but not more than 430mm,
- with a width of 290mm or more, but not more than 625mm,
- with a length of 270mm or more, but not more than 535mm,
- with a weight of 5.2kg or more, but not more than 12.5kg
|
2.00 % |
Exists in SQL |
|
| 8503009873 |
Pressure die-cast electric motor stator housing:
-of en ac-46000 aluminium,
-shot-blasted and machined,
-with a height of 70 mm or more but not more than 76 mm,
-with a width of 155 mm or more but not more than 162 mm,
-with a weight of 330 g or more but not more than 360 g
|
2.00 % |
Exists in SQL |
|
| 8503009875 |
Stator body of stacked electrical sheet having:
-an inner diameter of 18 mm or more, but not more than 35 mm,
-an outer diameter of 35 mm or more, but not more than 65 mm, and
-a length of 20 mm or more, but not more than 65 mm
-whether or not incorporated in a housing |
2.00 % |
Exists in SQL |
|
| 8503009899 |
Other |
2.00 % |
Exists in SQL |
|
No match found for 8503009910 so setting active to 0 !!!
No match found for 8503009931 so setting active to 0 !!!
No match found for 8503009932 so setting active to 0 !!!
No match found for 8503009933 so setting active to 0 !!!
No match found for 8503009934 so setting active to 0 !!!
No match found for 8503009937 so setting active to 0 !!!
No match found for 8503009943 so setting active to 0 !!!
No match found for 8503009953 so setting active to 0 !!!
No match found for 8503009955 so setting active to 0 !!!
No match found for 8503009958 so setting active to 0 !!!
No match found for 8503009960 so setting active to 0 !!!
No match found for 8503009963 so setting active to 0 !!!
No match found for 8503009965 so setting active to 0 !!!
No match found for 8503009975 so setting active to 0 !!!
No match found for 8503009980 so setting active to 0 !!!
No match found for 8503009999 so setting active to 0 !!!
No match found for 8503009858 so setting active to 0 !!!
API source
