| Commodity |
Description |
Duty Rate |
Status |
Save |
| 8501101010 |
For use in certain types of aircraft |
0.00 % |
Exists in SQL |
|
| 8501101020 |
Synchronous motor for a dishwasher with a water flow control mechanism with
- a length without axle of 24 mm (+/- 0.3),
- a diameter of 49.3 mm (+/- 0.3)
- a rated voltage of 220 v ac or more but not more than 240 v ac,
- a rated frequency of 50 hz or more but not more than 60 hz,
- an input power of not more than 4 w,
- a rotation speed of 4rpm or more but not more than 4.8rpm,
- an output torque of not less than 10kgf/cm
|
0.00 % |
Exists in SQL |
|
| 8501101040 |
Synchronous hybrid stepper motor with:
-an output not exceeding 18 w,
-two phases,
-a rated current of not more than 2.5 a/phase,
-a rated voltage of not more than 20 v,
-with or without a threaded shaft,
for use in the manufacture of 3d printers |
0.00 % |
Exists in SQL |
|
| 8501101050 |
Linear actuator for automotive electric seat adjustment applications: -consisting of a permanently excited dc motor with an integrated gear mechanism and leadscrew, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with hall effect sensor, -with a nominal voltage of 8 v or higher but not higher than 16 v, -with a rated output mechanical power not exceeding 20 w, and -with a specified temperature range from -40 °c to 160 °c, for use in the manufacture of automotive components for car''s seats |
0.00 % |
Exists in SQL |
|
| 8501101060 |
Rotary actuator for automotive electric seat adjustment applications: -consisting of a permanently excited dc motor with an integrated gear mechanism, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with hall effect sensor, -with a nominal voltage of 8 v or more but not more than 16 v, -with a rated output mechanical power not exceeding 35 w, and -with a specified temperature range from -40 °c to 160 °c, for use in the manufacture of automotive components for car''s seats |
0.00 % |
Exists in SQL |
|
| 8501101070 |
Electric controller for blinds of cooler, with an operating dc voltage of 9 v or more but not more than 16 v and a maximum power of less than 18 w, containing at least:
-a printed circuit board,
-an electric stepper motor,
-a connector,
-a plastic cover,
for use in the manufacture of goods of chapter 87 |
0.00 % |
Exists in SQL |
|
| 8501101090 |
Other |
0.00 % |
Exists in SQL |
|
| 8501109110 |
For use in certain types of aircraft |
0.00 % |
Exists in SQL |
|
| 8501109190 |
Other |
0.00 % |
Exists in SQL |
|
| 8501109310 |
For use in certain types of aircraft |
0.00 % |
Exists in SQL |
|
| 8501109390 |
Other |
0.00 % |
Exists in SQL |
|
| 8501109910 |
For use in certain types of aircraft |
0.00 % |
Exists in SQL |
|
| 8501109920 |
Worm axis motor for automotive electric seat adjustment applications: -consisting of a permanently excited dc motor with a worm wheel, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with hall effect sensor, -with a nominal voltage of 8 v or more but not more than 16 v, -with a rated output mechanical power not exceeding 35 w, and -with a specified temperature range from -40 °c to 160 °c, for use in the manufacture of automotive components for car''s seats |
0.00 % |
Exists in SQL |
|
| 8501109930 |
Linear actuator for automotive electric seat adjustment applications: -consisting of a permanently excited dc motor with an integrated gear mechanism and leadscrew, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with hall effect sensor, -with a nominal voltage of 8 v or higher but not higher than 16 v, -with a rated output mechanical power not exceeding 20 w, and -with a specified temperature range from -40 °c to 160 °c, for use in the manufacture of automotive components for car''s seats |
0.00 % |
Exists in SQL |
|
| 8501109940 |
Rotary actuator for automotive electric seat adjustment applications: -consisting of a permanently excited dc motor with an integrated gear mechanism, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with hall effect sensor, -with a nominal voltage of 8 v or more but not more than 16 v, -with a rated output mechanical power not exceeding 35 w, and -with a specified temperature range from -40 °c to 160 °c, for use in the manufacture of automotive components for car''s seats |
0.00 % |
Exists in SQL |
|
| 8501109950 |
Electric (dc) motor powering height adjusting with:
-a rated output mechanical power not exceeding 35 w,
-frame integration with a length of 156 mm, a height of 59 mm, a thickness of 36 mm and a weight of 500 g,
-a stall torque of 45 nm and ultimate torque of 200 nm,
-a maximum current of 15 a,
-no load speed of 7 rpm or more but not more than 10 rpm,
-a rotation speed of 4 000 rpm or more but not more than 5 600 rpm,
-a maximum noise level of 42 db(a),
-a maximum angular backlash up to 3 degrees, and
-a 8 tooth pinion module,
for use in the manufacture of automotive components for car''s seats |
0.00 % |
Exists in SQL |
|
| 8501109956 |
Dc motor:
- with a speed rotation of not more than 7 000 rpm without load,
- with a nominal voltage of not more than 18 v,
- with a maximum power of 24 w,
- for a specific temperature range from -40°c to 160°c,
- with or without a gear connection,
- with or without a mechanical attachment interface,
- with 2 electrical connections,
- with a maximum torque of 100 nm |
0.00 % |
Exists in SQL |
|
| 8501109958 |
Dc motor :
- with a speed rotation of not more than 6500 rpm (without load),
- with a nominal voltage of 12 v (± 4 v),
- with a maximal power below than 20 w,
- with a specified temperature range from -40°c to 160°c,
- with a worm gear drive,
- with a mechanical attachment interface,
- with 2 electrical connections,
- with a maximum torque of 75 nm
|
0.00 % |
Exists in SQL |
|
| 8501109960 |
Dc motor
- with a rotor speed of 3 500 rpm or more but not more than 5 000 rpm loaded and not more than 6 500 rpm when not loaded
- with a power supply voltage of 100 v or more but not more than 240 v
for use in the manufacture of electric fryers |
0.00 % |
Exists in SQL |
|
| 8501109964 |
Dc motor to control angular position of the flap to adjust gas flow in the air throttle and egr valve:
-with ingress protection (ip) standard of ip69,
-with a rotor speed of not more than 6 500 rpm when not loaded,
-with a rated voltage of 12.0 v (± 0.1),
-of a specified temperature range of - 40 °c or more but not more than 165 °c,
-with or without a connecting pinion,
-with or without an engine connector,
-with or without a flange,
-with a diameter of not more than 40 mm (not including the flange),
-with an overall height of not more than 90 mm (from the base to the pinion)
|
0.00 % |
Exists in SQL |
|
| 8501109965 |
Electric turbocharger actuator, with:
- a dc motor,
- an integrated gear mechanism,
- a (pulling)force of 200 n or more at a minimum of 140°c elevated ambient temperature,
- a (pulling) force of 250 n or more in each position of its stroke,
- an effective stroke of 15 mm or more but not more than 25 mm,
- with or without an on-board diagnostics interface
|
0.00 % |
Exists in SQL |
|
| 8501109970 |
Dc stepping motor, with - a two-phase winding, - a rated voltage of 9 v or more, but not more than 16.0 v - of a specified temperature range covering at least - 40 degc to + 105 degc - with or without connecting pinion - with or without motor drive connector |
0.00 % |
Exists in SQL |
|
| 8501109975 |
Permanently excited dc motor with
- a multiple-phase winding,
- an external diameter of 24 mm or more but not more than 38 mm,
- a rated speed of not more than 12 000 rpm,
- a power supply voltage of 8 v or more but not more than 27 v,
- with or without a pulley,
- with or without a gear wheel |
0.00 % |
Exists in SQL |
|
| 8501109979 |
Dc motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm or a pinion, of a specified temperature range covering at least - 20°c to + 70°c |
0.00 % |
Exists in SQL |
|
| 8501109990 |
Other |
0.00 % |
Exists in SQL |
|
| 8501200010 |
Of an output exceeding 735 w but not exceeding 150 kw, for use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8501200020 |
Of an output of less than 750 w or exceeding 150 kw, for use in certain types of aircraft |
0.00 % |
Exists in SQL |
|
| 8501200050 |
Universal ac/dc motor, rotating: -with a nominal supply voltage of 230 v, -with a power of more than 37.5 w but not more than 2 000 w, -with a stator cross-section of 93 mm or more but not more than 103 mm and a thickness of 15 mm or more but not more than 45 mm, and -with or without a worm gear, gears or a gearbox, for the production of a torque to a transmission shaft for small domestic appliances |
0.00 % |
Exists in SQL |
|
| 8501200060 |
Universal ac/dc motor, rotating: -with a nominal supply voltage of 230 v, -with a power of more than 37.5 w but not more than 1 200 w, -with a stator cross-section of 65 mm or more but not more than 75 mm and a thickness of 15 mm or more but not more than 45 mm, and -with or without a worm gear, gears or a gearbox, for the production of a torque to a transmission shaft for small domestic appliances |
0.00 % |
Exists in SQL |
|
| 8501200070 |
Universal ac/dc motor, rotating: -with a nominal supply voltage of 230 v, -with a power of more than 37.5 w but not more than 700 w, -with a stator cross-section of 49 mm or more but not more than 59 mm and a thickness of 15 mm or more but not more than 45mm, and -with or without a worm gear, gears or a gearbox, for the production of a torque to a transmission shaft for small domestic appliances |
0.00 % |
Exists in SQL |
|
| 8501200090 |
Other |
0.00 % |
Exists in SQL |
|
| 8501310010 |
Motors of an output exceeding 735 w, dc generators, for use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8501310020 |
For use in certain types of aircraft |
0.00 % |
Exists in SQL |
|
| 8501310045 |
Dc motors, brushless, with:
- an external diameter of 90 mm or more, but not more than 110 mm,
- a rated speed of not more than 3 680 rpm,
- an output of 600 w or more but not more than 740 w at 2 300 rpm and at 80 °c,
- a supply voltage of 12 v,
- a torque of not more than 5.67 nm,
- a rotor position sensor,
- an electronic star-point relay, and
- for use with an electric power steering control module
|
0.00 % |
Exists in SQL |
|
| 8501310047 |
Motor for automotive electric seat adjustment applications: -with a shaft output on both motor sides, -consisting of a permanently excited dc motor, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with hall effect sensor, -with a nominal voltage of 8 v or more but not more than 16 v, -with a rated output mechanical power not exceeding 120 w, and -with a specified temperature range from -40 °c to 160 °c, for use in the manufacture of automotive components for car''s seats |
0.00 % |
Exists in SQL |
|
| 8501310048 |
Brushless dc electric motors:
-with a rated power of 240 w or more, but not more than 260 w,
-with a voltage of 36 v or higher, but not higher than 52 v
-with a torque of 20 nm or more, but not more than 140 nm,
-with a housing made of aluminum, aluminum alloy or plastic,
-with or without a built-in controller,
-with a communication function in the lin or uart interface,
-weighing 1.5 kg or more, but not more than 5.0 kg,
-adapted for mounting in a bicycle frame
for use in the manufacture of e-bikes |
0.00 % |
Exists in SQL |
|
| 8501310049 |
Brushless dc electric motors:
- with a rated power of 240 w or more, but not more than 260 w,
- with a voltage of 24 v or higher, but not higher than 52 v,
- with a torque of 30 nm or more, but not more than 62 nm,
- with a lin, uart or can communication interface,
- with an internal planetary gearbox with fixed or variable ratio or direct drive,
- with a housing made of aluminum or aluminium alloy,
- with a weight of 1.5kg or more, but not more than 6kg,
- adapted for mounting in the front or rear bicycle wheel,
for use in the manufacture of e-bikes
|
0.00 % |
Exists in SQL |
|
| 8501310050 |
Dc motors, brushless, with:
- an external diameter of 80 mm or more, but not more than 200 mm,
- a supply voltage of 4 v or more, but not more than 16 v,
- an output at 20 °c of 200 w or more, but not more than 750 w,
- a torque at 20 °c of 2.00 nm or more, but not more than 7.00 nm,
- a rated speed at 20 °c of 600 rpm or more, but not more than 3 100 rpm,
- with or without a pulley,
- with or without an electronic power steering sensor/controller |
0.00 % |
Exists in SQL |
|
| 8501310052 |
Electric brushless direct current motor finished with biocompatible materials such as stainless steel according to specification 17-4 ph or type 303, 316l, 400 with:
-a three-phase winding,
-an output power not exceeding 280 w,
-a length with gearhead of 116.1 mm or more but not more than 117.2 mm,
-an external diameter of 13.86 mm or more but no more than 13.92 mm,
-a maximum torque of motor with gearhead 246.6 mnm in 25℃,
-a no-load radial speed of motor with gearhead with 9 900 rpm, at 24v in 25°c,
-a weight of motor with gearhead of 70.5 g or more but not more than 71.5 g, a resistance to peak temperature of 140°c or more (non-operating), a maximal air leak between shaft and shaft seals of 15 pa/s at given 2 bars of pressure,
-14 functional pins for power and control purpose,
-a flexible printed circuit with length of 245 mm but no longer than 255 mm with mounted 8 pin male connector
for use in the manufacture of medical devices with right-left rotation and oscillation function |
0.00 % |
Exists in SQL |
|
| 8501310054 |
Brushless dc electric motor, with:
-a rated voltage of 310 v,
-a rated power of 350 w or more but not more than 368 w,
-an input power of 500 w or more but not more than 550 w,
-output power of 350 w or more but not more than 400 w,
-an external diameter without bracket connector and pulley of 143.2 mm or more but not more than 143.8 mm,
-a rated speed of 16300 rpm or more but not more than 16500 rpm,
-a weight of 2.33 kg or more but not more than 2.40 kg,
-a pulley
|
0.00 % |
Exists in SQL |
|
| 8501310055 |
Dc motor with or without commutator, for driving hand-held power tools, lawn mowers or home appliances, with:
-an external diameter of 24.2 mm or more, but not more than 140 mm,
-a rated speed of 3300 rpm or more, but not more than 26200 rpm,
-a rated supply voltage of 3.6 v or more, but not more than 230 v,
-an output power of more than 37.5 w , but not more than 2400 w,
-a free load current of not more than 20.1 a,
-a maximum efficiency of 50% or more, |
0.00 % |
Exists in SQL |
|
| 8501310058 |
Permanently excited dc motor with:
-an external diameter of 27 mm or more but not more than 90 mm, including mounting flange,
-a rated speed of not more than 25 000 rpm,
-an output of 45 w or more but not more than 400 w, and
-a supply voltage of 9 v or more but not more than 50 v,
-whether or not a multiple-phase winding,
-whether or not with a drive disc,
-whether or not with a crankcase,
-whether or not with a fan,
-whether or not with a cap assembly,
-whether or not with a sun gear,
-whether or not with a speed and rotational direction encoder,
-whether or not with or without a speed or rotational direction sensor of resolver type or hall effect type,
-whether or not with a mounting flange
for use in the manufacture of air suspension seats in tractors, earthmoving machines and forklifts or for use in the manufacture of actuators for height-adjustable furniture
|
0.00 % |
Exists in SQL |
|
| 8501310063 |
Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct current motor with:
- a specified speed of not more than 6000rpm,
- a minimum output of 400w, but not more than 1.3kw (at 12 v), or with a minimum output of 750w but not more than 1.55kw (at 36 v),
- a flange diameter of 85mm or more but not more than 200mm,
- a maximum length of 335mm, measured from the beginning of the shaft to the outer ending,
- a housing length of not more than 265mm, measured from the flange to the outer ending,
- a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an o-ring and grease),
- a stator with single t-tooth design and single coil windings in 9/6 or 12/8 or 12/10 topology, and
- surface magnets,
- whether or not with electronic power steering controller,
- whether or not with pulley or coupling,
- whether or not with rotor position sensor
|
0.00 % |
Exists in SQL |
|
| 8501310068 |
Camshaft actuator for controlling the timing of valve opening by using electromotor in a continuous variable valve timing system of an internal combustion piston engine, of:
-a length of 110 mm or more but not more than 140 mm,
-a width of 90 mm or more but not more than 130 mm,
-a height of 80 mm or more but not more than 110 mm
for use in the manufacture of engines of motor vehicles |
0.00 % |
Exists in SQL |
|
| 8501310085 |
Power transmission device for controlling the output of exhaust gas turbochargers, consisting of:
- a dc motor of an output not exceeding 600 w,
- for usage with a supply voltage of 8 v or more but no more than 48 v,
- with motor connection (plug-in connection),
- whether or not with position sensor,
- whether or not with integrated control and power electronics,
- whether or not with spring mechanism for resetting the lever,
- built in a housing with reduction gear and lever attached to the motor drive shaft, or
- built in a housing with threads integrated into the rotor of the motor for linear movement of the integrated control rod
|
0.00 % |
Exists in SQL |
|
| 8501310099 |
Other |
0.00 % |
Exists in SQL |
|
| 8501320010 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8501320040 |
Dc motor with or without commutator, for driving hand-held power tools, lawn mowers or home appliances, with:
-an external diameter of 24.2 mm or more, but not more than 140 mm,
-a rated speed of 3300 rpm or more, but not more than 26200 rpm,
-a rated supply voltage of 3.6 v or more, but not more than 230 v,
-an output power of more than 37.5 w , but not more than 2400 w,
-a free load current of not more than 20.1 a,
-a maximum efficiency of 50% or more, |
0.00 % |
Exists in SQL |
|
| 8501320065 |
Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct current motor with:
- a specified speed of not more than 6000rpm,
- a minimum output of 400w, but not more than 1.3kw (at 12 v), or with a minimum output of 750w but not more than 1.55kw (at 36 v),
- a flange diameter of 85mm or more but not more than 200mm,
- a maximum length of 335mm, measured from the beginning of the shaft to the outer ending,
- a housing length of not more than 265mm, measured from the flange to the outer ending,
- a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an o-ring and grease),
- a stator with single t-tooth design and single coil windings in 9/6 or 12/8 or 12/10 topology, and
- surface magnets,
- whether or not with electronic power steering controller,
- whether or not with pulley or coupling,
- whether or not with rotor position sensor
|
0.00 % |
Exists in SQL |
|
| 8501320099 |
Other |
0.00 % |
Exists in SQL |
|
| 8501330010 |
Motors of an output not exceeding 150 kw and generators, for use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8501330020 |
Of an output exceding 150 kw, for use in certain types of aircraft |
0.00 % |
Exists in SQL |
|
| 8501330030 |
Electric drive for motor vehicles, with an output of not more than 315 kw:
- with an ac or dc motor with or without transmission,
- with or without power electronics
|
0.00 % |
Exists in SQL |
|
| 8501330099 |
Other |
0.00 % |
Exists in SQL |
|
| 8501340010 |
Generators for use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8501340099 |
Other |
0.00 % |
Exists in SQL |
|
| 8501402010 |
Of an output exceeding 735 w, for use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8501402020 |
For use in certain types of aircraft |
0.00 % |
Exists in SQL |
|
| 8501402035 |
Electric ac motor, single-phase, with:
-a rated power of 120 w or more but not more than 150 w,
-an input power of 280 w or more but not more than 350 w,
-an external diameter without bracket connector and pulley of 145 mm or more but not more than 160 mm,
-a rated speed of 2 680 rpm or more but not more than 3 000 rpm,
-a weight of 4.2 kg or more but not more than 4.6 kg,
-pulleys, a spindle and a tachometer,
for use in the manufacture of home appliance products |
0.00 % |
Exists in SQL |
|
| 8501402045 |
Electric ac motor, single-phase, with:
-a rated power of 275 w or more, but not more than 325 w,
-an input power of 600 w or more but not more than 700 w,
-an external diameter without bracket and connector of 150 mm or more but not more than 170 mm,
-a rated speed of 15 000 rpm or more but not more than 20 000 rpm,
-a weight of 4.2 kg or more,
-a pulley and a tachometer,
for use in the manufacture of home appliance products |
0.00 % |
Exists in SQL |
|
| 8501402050 |
Electric ac motor, single-phase, with:
-a rated power of 300 w or more but not more than 370 w,
-an input power of 600 w or more but not more than 700 w,
-an external diameter without bracket and connector of 150 mm or more but not more than 170 mm,
-a rated speed of 15 000 rpm or more but not more than 19 000 rpm,
-a weight of 4.8 kg or more,
-a pulley,
for use in the manufacture of home appliance products |
0.00 % |
Exists in SQL |
|
| 8501402055 |
Electric ac motor, single-phase, with:
-a rated power of 275 w or more, but not more than 325 w,
-an input power of 600 w or more but not more than 700 w,
-an external diameter without bracket and connector of 160 mm or more but not more than 180 mm,
-a rated speed of 15 000 rpm or more but not more than 19 000 rpm,
-a weight of not more than 4.4 kg,
-a pulley,
for use in the manufacture of home appliance products |
0.00 % |
Exists in SQL |
|
| 8501402060 |
Electric ac motor, single-phase, with:
-a rated power of 275 w or more but not more than 325 w,
-an output power of 550 w or more but not more than 600 w,
-an input power of 800 w or more but not more than 1 000 w,
-an external diameter of more than 150 mm but not more than 170 mm without the bracket,
-a rated speed of more than 16 000 rpm but not more than 18 000 rpm,
-a weight of 3.4 kg or more but not more than 3.7 kg,
-a pulley,
for use in the manufacture of home appliance products |
0.00 % |
Exists in SQL |
|
| 8501402070 |
Electric ac motor, single-phase, whether or not with commutator
- with a nominal output of 180 w or more,
- with an input power of 150 w or more but not more than 2 700 w,
- with an external diameter of more than 44.8 but not more than 135.2 mm,
- with a rated speed of more than 10 000 rpm but not more than 50 000 rpm,
- whether or not equipped with air-inducting ventilator,
- whether or not with mechanical device (pinion, screws, gear connection etc.) on the shaft,
for use in the manufacture of domestic appliances
|
0.00 % |
Exists in SQL |
|
| 8501402080 |
Other |
0.00 % |
Exists in SQL |
|
| 8501408010 |
Of an output not exceeding 150 kw, for use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8501408020 |
Of an output exceeding 150 kw, for use in certain types of aircraft |
0.00 % |
Exists in SQL |
|
| 8501408050 |
Electric drive for motor vehicles, with an output of not more than 315 kw:
- with an ac or dc motor with or without transmission,
- with or without power electronics
|
0.00 % |
Exists in SQL |
|
| 8501408070 |
Electric ac motor, single-phase, whether or not with commutator
- with a nominal output of 180 w or more,
- with an input power of 150 w or more but not more than 2 700 w,
- with an external diameter of more than 44.8 but not more than 135.2 mm,
- with a rated speed of more than 10 000 rpm but not more than 50 000 rpm,
- whether or not equipped with air-inducting ventilator,
- whether or not with mechanical device (pinion, screws, gear connection etc.) on the shaft,
for use in the manufacture of domestic appliances
|
0.00 % |
Exists in SQL |
|
| 8501408090 |
Other |
0.00 % |
Exists in SQL |
|
| 8501510010 |
Of an output exceeding 735 w, for use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8501510020 |
Of an output of less than 750 w, for use in certain types of aircraft |
0.00 % |
Exists in SQL |
|
| 8501510025 |
Electric permanent magnet synchronous motor with:
-an output power of 550 w,
-a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron (per gb/t 13560 standard) enclosed in polyethylene cover,
-an outer diameter of motor magnet shaft end with dimension of 10.001 mm or more but no more than 10.007 mm,
-terminals located across the radius 32.5 mm and separated by an angle of 21.8°,
-a motor housing made of adc12 or ac46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per jis h5302 or en1706 standard),
-a back electromotive force constant (ke) of 0.03306 v-sec/rad or more but no more than 0.03654 v-sec/rad,
-a back electromotive force harmonic order - 5th of no more than 0.38% (of fundamental) and 7th of no more than 0.25% (of fundamental),
-a cogging torque of no more than 13 mnm,
-a friction torque in ambient temperature of no more than 22 mnm,
-a maximum temperature of motor operation of no more than 200 °c
|
0.00 % |
Exists in SQL |
|
| 8501510030 |
Ac synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000rpm,with:
- an output of 340w or more but not more than 7.4kw,
- a flange of dimensions of not more than 180mm × 180mm, and
- a length from flange to extreme end of resolver of not more than 271mm |
0.00 % |
Exists in SQL |
|
| 8501510035 |
Electric permanent magnet synchronous motor with:
-an output power of 600 w,
-a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron and dysprosium enclosed in aluminium cover,
-an outer diameter of motor magnet shaft end with dimension of 10.001 mm or more but no more than 10.007 mm,
-terminals located across the diameter 59.2 mm and separated by an angle 30.0°,
-a housing made of electrogalvanised steel (per jis g3313 grade sece standard) using a deep-drawing stamping process,
-a diameter of 88.600 mm or less but no less than 88.546 mm at the motor-system assembly interface,
-a back electromotive force constant (ke) of 0.03277 v-sec/rad or more but no more than 0.03623 v-sec/rad,
-a back electromotive force harmonic order - 5th of no more than 0.35% (of fundamental) and 7th of no more than 0.30% (of fundamental),
-a cogging torque of no more than 12 mnm,
-a friction torque in ambient temperature of no more than 23 mnm,
-a maximum temperature of motor operation of no more than 200 °c
|
0.00 % |
Exists in SQL |
|
| 8501510040 |
Electric ac motor, three-phase, with:
-a rated power of 280 w or more but not more than 320 w,
-an output power of 480 w or more but not more than 540 w,
-an input power of 800 w or more but not more than 900 w,
-an external diameter of 150 mm or more but not more than 170 mm,
-a rated speed of 15 000 rpm or more but not more than 20 000 rpm,
-a weight of 6 kg or more but not more than 6.4 kg,
-a pulley and a tachometer,
for use in the manufacture of home appliance products |
0.00 % |
Exists in SQL |
|
| 8501510045 |
Automotive-ready brushless permanently excited magnet synchronous alternating current motor with:
-a specified speed of not more than 7000 rpm,
-an output of 400 w or more but not more than 750 w (at 12 v),
-a flange diameter of 80 mm or more, but not more than 200 mm,
-a maximum length of not more than 335 mm, measured from the beginning of the shaft to its outer end,
-a housing length of not more than 265 mm, measured from the flange to the outer end,
-a steel sheet or die-cast aluminium basic housing consisting of not more than two parts, including electrical components and a flange with two or more but not more than 11 holes, whether or not with a sealing connection (groove with o-ring and protective grease or liquid seal interface),
-a stator with single t-tooth design and single coil winding with 9/6 or 12/10 or 12/8 topology and surface magnets,
-whether or not with electronic power steering controller,
-whether or not with pulley or coupling,
-whether or not with rotor position sensor
|
0.00 % |
Exists in SQL |
|
| 8501510050 |
Three phase ac synchronous brushless permanent magnet motor with:
-an output of 500 w or more but not more than 700 w,
-an external diameter of 129.7 mm or more but not more than 180.3 mm,
-a rated speed of 16 000 rpm or more but not more than 17 000 rpm,
-a weight of 2.5 kg or more but not more than 3.1 kg, and
-with a pulley,
for use in the manufacture of home appliance products |
0.00 % |
Exists in SQL |
|
| 8501510090 |
Other |
0.00 % |
Exists in SQL |
|
| 8501522010 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8501522050 |
Ac synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000rpm,with:
- an output of 340w or more but not more than 7.4kw,
- a flange of dimensions of not more than 180mm × 180mm, and
- a length from flange to extreme end of resolver of not more than 271mm |
0.00 % |
Exists in SQL |
|
| 8501522070 |
Automotive-ready brushless permanently excited magnet synchronous alternating current motor with:
-a specified speed of not more than 7000 rpm,
-an output of 750 w or more but not more than 1.8 kw (at 12 v),
-a flange diameter of 80 mm or more, but not more than 200 mm,
-a maximum length of not more than 335 mm, measured from the beginning of the shaft to its outer end,
-a housing length of not more than 265 mm, measured from the flange to the outer end,
-a steel sheet or die-cast aluminium basic housing consisting of not more than two parts, including electrical components and a flange with two or more but not more than 11 holes, whether or not with a sealing connection (groove with o-ring and protective grease or liquid seal interface),
-a stator with single t-tooth design and single coil winding with 9/6 or 12/10 or 12/8 topology and surface magnets,
-whether or not with electronic power steering controller,
-whether or not with pulley or coupling,
-whether or not with rotor position sensor
|
0.00 % |
Exists in SQL |
|
| 8501522080 |
Electric permanent magnet synchronous motor with:
-an output power of 850 w,
-a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron (per gb/t 13560 standard) enclosed in polyethylene cover,
-an outer diameter of motor magnet shaft end with dimension of 10.001 mm or more but no more than 10.007 mm,
-terminals located across the radius 26.2 mm and separated by an angle 30.0°,
-a housing made of adc12 or ac46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per jis h5302 or en1706 standard) and anodised coating (per astm b580 type e standard),
-a back electromotive force constant (ke) of 0.04009 v-sec/rad or more but no more than 0.04431 v-sec/rad,
-a back electromotive force harmonic order - 5th of no more than 0.36% (of fundamental) and 7th of no more than 0.24% (of fundamental),
-a cogging torque of no more than 20 mnm,
-a friction torque in ambient temperature of no more than 26.5 mnm,
-a maximum temperature of motor operation of no more than 200 °c
|
0.00 % |
Exists in SQL |
|
| 8501522089 |
Other |
0.00 % |
Exists in SQL |
|
| 8501523010 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8501523090 |
Other |
0.00 % |
Exists in SQL |
|
| 8501529010 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8501529090 |
Other |
0.00 % |
Exists in SQL |
|
| 8501535010 |
Electric drive for motor vehicles, with an output of not more than 315 kw:
- with an ac or dc motor with or without transmission,
- with or without power electronics
|
0.00 % |
Exists in SQL |
|
| 8501535020 |
Ac traction motor of the interior permanent magnet synchronous motor (ipmsm) type with:
-a torque output of 200 nm or more, but not more than 400 nm,
-a power output of 50 kw or more, but not more than 200 kw ,
-a rotation speed of no more than 15 000 rpm,
for use in the manufacture of electric vehicles |
0.00 % |
Exists in SQL |
|
| 8501535030 |
Permanent magnet synchronous traction motor, with:
-a continuous power of 110 kw or more but not more than 180 kw,
-a liquid cooled system,
-a total length of 500 mm or more but not more than 650 mm,
-a total width of 600 mm or more but not more than 700 mm,
-a total height of 550 mm or more but not more than 650 mm,
-weighing of not more than 350 kg,
-3 suspension points |
0.00 % |
Exists in SQL |
|
| 8501535040 |
Permanent magnet traction ac motor, with:
-a continuous power of 110 kw or more but not more than 150 kw,
-a liquid cooled system,
-a total length of 460 mm or more but not more than 590 mm,
-a total width of 450 mm or more but not more than 580 mm,
-a total height of 490 mm or more but not more than 590 mm,
-a weight of not more than 310 kg,
-4 mounting points |
0.00 % |
Exists in SQL |
|
| 8501535050 |
Asynchronous traction motor, with:
-a continuous power of 140 kw or more but not more than 180 kw,
-a liquid cooled system,
-a total length of 580 mm or more but not more than 730 mm,
-a total width of 550 mm or more but not more than 670 mm,
-a total height of 510 mm or more but not more than 630 mm,
-with a weight of not more than 390 kg,
-with or without reduction gear,
-with or without starter generator,
-2 mounting points,
for use in the manufacture of the electric drive of hybrid buses |
0.00 % |
Exists in SQL |
|
| 8501535090 |
Other |
0.00 % |
Exists in SQL |
|
| 8501538110 |
Of an output not exceeding 150 kw, for use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8501538120 |
Of an output exceeding 150 kw, for use in certain types of aircraft |
0.00 % |
Exists in SQL |
|
| 8501538190 |
Other |
0.00 % |
Exists in SQL |
|
| 8501539410 |
For use in certain types of aircraft |
0.00 % |
Exists in SQL |
|
| 8501539490 |
Other |
0.00 % |
Exists in SQL |
|
| 8501539910 |
For use in certain types of aircrafts |
0.00 % |
Exists in SQL |
|
| 8501539990 |
Other |
0.00 % |
Exists in SQL |
|
| 8501612010 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8501612090 |
Other |
0.00 % |
Exists in SQL |
|
| 8501618010 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8501618099 |
Other |
0.00 % |
Exists in SQL |
|
| 8501620010 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8501620040 |
Ac, 3-phase generator, with:
-a continuous power of 147 kva or more but not more than 222 kva,
-a continuous torque of 650 nm or more but not more than 900 nm,
-a maximum working speed of 2700 revolutions per minute (rpm),
-a liquid cooled system,
-a length of 100 mm or more but not more than 200 mm,
-a width of 550 mm or more but not more than 650 mm,
-a height of 550 mm or more but not more than 650 mm,
-weighing of not more than 150 kg
|
0.00 % |
Exists in SQL |
|
| 8501620098 |
Other |
0.00 % |
Exists in SQL |
|
| 8501630010 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8501630099 |
Other |
0.00 % |
Exists in SQL |
|
| 8501640000 |
Of an output exceeding 750 kva |
0.00 % |
Exists in SQL |
|
| 8501710000 |
Of an output not exceeding 50 w |
0.00 % |
Exists in SQL |
|
| 8501720000 |
Of an output exceeding 50 w |
0.00 % |
Exists in SQL |
|
| 8501800000 |
Photovoltaic ac generators |
0.00 % |
Exists in SQL |
|
