| Commodity |
Description |
Duty Rate |
Status |
Save |
| 8414101500 |
Of a kind used for the manufacture of semiconductors or solely or principally used for the manufacture of flat panel displays |
0.00 % |
Exists in SQL |
|
| 8414102510 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8414102530 |
Tandem pump consisting of:
-an oil pump with displacement of 21.6 cc/rev (± 2 cc/rev) and working pressure 1.5 bar at 1 000 revolutions per minute,
-vacuum pump with displacement of 120 cc/rev (± 12 cc/rev) and performance of -666 mbar in 6 seconds at 750 revolutions per minute
for use in the manufacture of engines of motor vehicles |
0.00 % |
Exists in SQL |
|
| 8414102590 |
Other |
0.00 % |
Exists in SQL |
|
| 8414108110 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8414108190 |
Other |
0.00 % |
Exists in SQL |
|
| 8414108910 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8414108990 |
Other |
0.00 % |
Exists in SQL |
|
| 8414202000 |
Handpumps for cycles |
0.00 % |
Exists in SQL |
|
| 8414208010 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8414208090 |
Other |
2.00 % |
Exists in SQL |
|
| 8414302010 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8414302090 |
Other |
2.00 % |
Exists in SQL |
|
| 8414308110 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8414308150 |
Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating of 0.5 kw or more but not more than 10 kw, with a displacement volume of not more than 35 cm³, of the type used in refrigeration equipment |
2.00 % |
Exists in SQL |
|
| 8414308160 |
Hermetic rotary compressors for either hydrofluorocarbon (hfc) or hydrocarbon refrigerants:
- driven by ‘on-off’ single phase alternate current (ac) or ‘brushless direct current’ (bldc) variable speed motors,
- with a nominal power rating of not more than 1.5kw,
- a rated voltage of 100v or more but not more than 240v,
- with a height of not more than 300mm,
- an external diameter of not more than 150mm,
- with a unit weight of not more than 15kg,
for use in the manufacture of heat pumps for household appliances, including clothes dryers
|
2.00 % |
Exists in SQL |
|
| 8414308189 |
Other |
2.00 % |
Exists in SQL |
|
| 8414308910 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8414308920 |
Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0.4 kw but not more than 10 kw |
2.00 % |
Exists in SQL |
|
| 8414308940 |
Electrical compressor for motor vehicle air conditioning system:
-with a power output of more than 0.4 kw but not exceeding 10 kw,
for use in the manufacture of motor vehicles of subheading 8703 40 |
2.00 % |
Exists in SQL |
|
| 8414308990 |
Other |
2.00 % |
Exists in SQL |
|
| 8414401000 |
Giving a flow per minute not exceeding 2 m3 |
2.00 % |
Exists in SQL |
|
| 8414409000 |
Giving a flow per minute exceeding 2 m3 |
2.00 % |
Exists in SQL |
|
| 8414510010 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8414510090 |
Other |
2.00 % |
Exists in SQL |
|
| 8414591500 |
Fans of a kind used solely or principally for cooling microprocessors, telecommunication apparatus, automatic data processing machines or units of automatic data processing machines |
0.00 % |
Exists in SQL |
|
| 8414592510 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8414592550 |
Axial fans with built-in motor, for the generation of an air flow for the cooling of compressors and the distribution of air with
-a direct current operating voltage of more than 10 v but not more than 14 v, or
-an alternating current operating voltage of more than 185 v, but not more than 254 v,
-an operating temperature of -40 °c or higher, but not higher than 70 °c,
for use in the manufacture of heat pump tumble dryers and refrigerators or freezers |
2.00 % |
Exists in SQL |
|
| 8414592590 |
Other |
2.00 % |
Exists in SQL |
|
| 8414593510 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8414593520 |
Radial fan, with:
-a dimension of 25mm (height) x 85mm (width) x 85mm (depth),
-a weight of 120 g,
-a rated voltage of 13.6 vdc (direct current voltage),
-an operating voltage of 9 vdc or more but not more than 16 vdc (direct current voltage),
-a rated current of 1.1 a (typ),
-a rated power of 15 w,
-a rotation speed of 500 rpm (revolutions per minute) or more but not more than 4800 rpm (revolutions per minute) (free flow),
-an air flow of not more than 17.5 litre/s,
-an air pressure of not more than16 mm h2o ≈ 157 pa,
-an overall sound pressure of not more than 58 db(a) at 4800 rpm (revolutions per minute), and
with a fin (fan interconnect network) interface for communication with the heating and air-conditioning control unit used in car seat ventilation systems |
2.00 % |
Exists in SQL |
|
| 8414593530 |
Electric blower for cooling the high-voltage battery of a hybrid passenger car with:
-a control unit,
-mosfet inverter,
-a voltage of 9 v or more but not more than 16 v,
-ambient temperature of - 40 °c or more, but not more than 80 °c,
for use in the manufacture of hybrid passenger cars |
2.00 % |
Exists in SQL |
|
| 8414593540 |
Electric blower for cooling the battery module:
-with an operating voltage of 9 vdc or more but not more than 16 vdc,
-with a centrifugal electric fan,
-with a connector,
-with a plastic case,
-with or without a control unit for the fan electric motor,
for use in the production of rechargeable batteries for hybrid and electric vehicles |
2.00 % |
Exists in SQL |
|
| 8414593590 |
Other |
2.00 % |
Exists in SQL |
|
| 8414599510 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8414599590 |
Other |
2.00 % |
Exists in SQL |
|
| 8414600000 |
Hoods having a maximum horizontal side not exceeding 120 cm |
2.00 % |
Exists in SQL |
|
| 8414700000 |
Gas-tight biological safety cabinets |
0.00 % |
Exists in SQL |
|
| 8414801110 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8414801190 |
Other |
2.00 % |
Exists in SQL |
|
| 8414801910 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8414801990 |
Other |
2.00 % |
Exists in SQL |
|
| 8414802210 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8414802220 |
Air membrane compressor with:
- a flow of 4.5 l/min or more, but not more than 12 l/min,
- power input of not more than 14 w, and
- a gauge pressure capacity not exceeding 400 hpa (0.4 bar) of a kind used in the production of motor vehicle seats |
2.00 % |
Exists in SQL |
|
| 8414802290 |
Other |
2.00 % |
Exists in SQL |
|
| 8414802810 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8414802890 |
Other |
2.00 % |
Exists in SQL |
|
| 8414805110 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8414805190 |
Other |
2.00 % |
Exists in SQL |
|
| 8414805910 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8414805990 |
Other |
2.00 % |
Exists in SQL |
|
| 8414807310 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8414807330 |
Hermetic rotary compressors for either hydrofluorocarbon (hfc) or hydrocarbon refrigerants:
- driven by ‘on-off’ single phase alternate current (ac) or ‘brushless direct current’ (bldc) variable speed motors,
- with a nominal power rating of not more than 1.5kw,
- a rated voltage of 100v or more but not more than 240v,
- with a height of not more than 300mm,
- an external diameter of not more than 150mm,
- with a unit weight of not more than 15kg,
for use in the manufacture of heat pumps for household appliances, including clothes dryers |
2.00 % |
Exists in SQL |
|
| 8414807350 |
Hermetic heat pump compressor for r450a or r290 refrigerants:
- not charged with refrigerant,
- pre-charged with lubricant oil,
- with a single phase induction permanent split capacitor motor or a dc brushless motor,
- having suction and/or discharge connections,
- with a displacement of 8.05 cm3 or more, but not more than 55 cm3,
- running at 900 rpm or more, but not more than 7 800 rpm, and
- with a cooling capacity of 920 w or more, but not more than 10 440 w in ashrae conditions
|
2.00 % |
Exists in SQL |
|
| 8414807389 |
Other |
2.00 % |
Exists in SQL |
|
| 8414807510 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8414807590 |
Other |
2.00 % |
Exists in SQL |
|
| 8414807810 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8414807890 |
Other |
2.00 % |
Exists in SQL |
|
| 8414808010 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8414808090 |
Other |
2.00 % |
Exists in SQL |
|
| 8414900010 |
For use in civil aircraft |
0.00 % |
Exists in SQL |
|
| 8414900015 |
Fan assembly made of aluminium and magnesium alloy:
-with an outer diameter of 54 mm or more but not more than 130 mm,
-with a height of 8 mm or more but not more than 30 mm,
-with two discs connected by blades of involute shape,
-with or without dowel, and with or without washer,
for use in the manufacture of electromotors |
2.00 % |
Exists in SQL |
|
| 8414900020 |
Aluminium pistons, for incorporation into compressors of air conditioning machines of motor vehicles |
2.00 % |
Exists in SQL |
|
| 8414900025 |
Scroll type compressor housing of an aluminium alloy of a kind with:
-a heat resistance of 200 °c or more but not more than 250 °c,
-one or more fixing points suitable for mounting an actuator,
for use in the manufacture of turbochargers |
2.00 % |
Exists in SQL |
|
| 8414900035 |
Compressor head unit made of impregnated aluminium alloy for installation in air-conditioning compressors for motor vehicles with:
-a width of 115 mm or more but not more than 160 mm,
-a length of 115 mm or more but not more than 170 mm,
-a height of 30 mm or more but not more than 100 mm,
-a piece of pressure branch with pipe connection,
-one or two mounting holes and
-more than one overflowing hole
|
2.00 % |
Exists in SQL |
|
| 8414900045 |
Pressure casted rotor front plate or cover of an electric supercharger:
-of en ac-46000 aluminium,
-shot-blasted and machined,
-with a hardness of 60 or more on the hardness brinell wolfram (hbw) scale (2.5/62.5, according to iso 6506),
-with a tensile strength of 240 n/mm2 or more,
-with a height of 22 mm or more but not more than 26 mm,
-with a diameter of 128 mm or more but not more than 136 mm,
-with a weight of 220 g or more but not more than 250 g
|
2.00 % |
Exists in SQL |
|
| 8414900080 |
Turbocharger wheel housing of cast aluminium alloy or cast iron:
- with a heat resistance up to 400°c,
- with a hole of 30 mm or more but not more than 300 mm for the insertion of the compressor wheel,
for use in the automotive industry
|
2.00 % |
Exists in SQL |
|
| 8414900090 |
Other |
2.00 % |
Exists in SQL |
|
