| Commodity |
Description |
Duty Rate |
Status |
Save |
| 7609000010 |
For use in certain types of aircraft |
4.00 % |
Exists in SQL |
|
| 7609000030 |
Aluminium connecting block for automotive air conditioning systems:
-with a t6 hardening,
-equipped with round stubs with a circumferential outer groove,
-with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not more than 11 mm, and a lower radius of 12 mm or more but not more than 17 mm,
-with a distance between holes of 15 mm or more but not more than 22 mm,
-with sockets designed for brazing or clamping,
-with mounting holes for m6 or m8 mounting screw, threaded or not,
-with a width of 5 mm or more but not more than 16 mm,
-for connecting a compressor, a condenser, an evaporator, a chiller and other lines |
4.00 % |
Exists in SQL |
|
| 7609000040 |
Flame brazed aluminium block for connecting tubes in automotive heat exchangers and/or turbocharged air coolers and/or automatic transmission coolers:
-with extruded, bent connection tubes with an outer diameter of 5 mm or more, but not more than 25 mm,
-with a weight of 0.02 kg or more, but not more than 0.25 kg,
for use in the manufacture of cooling system in vehicles of chapter 87 |
4.00 % |
Exists in SQL |
|
| 7609000050 |
Machined aluminium components:
-containing by weight 0.55%, or more but not more than 0.61% of magnesium,
-containing by weight 0.55%, or more but not more than 0.61% of silicon,
-with a hardening state of t5 or t6,
-with a mass of 0.05 kg or more, but not more than 0.2 kg,
for use in the manufacture of co₂ cooling systems in motor vehicles |
4.00 % |
Exists in SQL |
|
| 7609000060 |
Aluminium connection block:
-with a weight of 3 g or more but not more than 400 g,
-manufactured from 6061-t6 or 6060-t6 or 6082-t6 aluminium grade,
-being an integral part of an air conditioning hose assembly or oil cooling line hose assembly or air brake line hose assembly or water cooling line hose assembly,
-with holes (sockets) or splines (pilots) or threads that allow installation in an automotive or other air conditioning system (also understood as installation in the line),
-with sockets designed for brazing or fastening,
-with at least 1 through-hole with a diameter of 3 mm or more but not more than 25 mm,
for the manufacture of automotive cooling and air conditioning systems |
4.00 % |
Exists in SQL |
|
| 7609000090 |
Other |
4.00 % |
Exists in SQL |
|
