Trade Tariff Heading: 7410
Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,15 mm
| Commodity |
Description |
Duty Rate |
Status |
Save |
| 7410110050 |
Refined copper foil and strips, electrolytically manufactured, with a thickness of 0.015 mm or more but not more than 0.150 mm, used for the manufacture of laminates for printed circuit boards and of printed circuit boards in the printed circuit board industry |
0.00 % |
Exists in SQL |
|
| 7410110090 |
Other |
0.00 % |
Exists in SQL |
|
| 7410120000 |
Of copper alloys |
0.00 % |
Exists in SQL |
|
| 7410210010 |
Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil |
0.00 % |
Exists in SQL |
|
| 7410210020 |
Foils, rolls composed of one layer of glass epoxy of 100 µm colaminated with refined copper foil on one or two sides of 35 µm with a tolerance of 10% for use in the production of smart cards |
0.00 % |
Exists in SQL |
|
| 7410210030 |
Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil |
0.00 % |
Exists in SQL |
|
| 7410210040 |
Sheet or plates:
- consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or
- consisting of multiple layers of paper, impregnated with phenolic resin,
coated on one or both sides with a copper film with a maximum thickness of 0.15 mm |
0.00 % |
Exists in SQL |
|
| 7410210050 |
Plates:
-consisting of at least one layer of fibreglass fabric impregnated with thermosetting resin,
-covered on one or both sides with copper foil with a thickness of not more than 0.15 mm, and
-with a dielectric constant (dk) of less than 3.9 and a loss factor (df) of less than 0.015 at a measuring frequency of 10 ghz, as measured according to ipc-tm-650 |
0.00 % |
Exists in SQL |
|
| 7410210055 |
Plates:
- consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,
- covered on one or both sides with copper foil with a thickness of not more than 0.15 mm,
- with a dielectric constant (dk) of less than 5.4 at 1 mhz, as measured according to ipc-tm-650 2.5.5.2,
- with a loss tangent of less than 0.035 at 1 mhz, as measured according to ipc-tm-650 2.5.5.2,
- with a comparative tracking index (cti) of 600 or more |
0.00 % |
Exists in SQL |
|
| 7410210090 |
Other |
0.00 % |
Exists in SQL |
|
| 7410220000 |
Of copper alloys |
0.00 % |
Exists in SQL |
|
No match found for 7410110040 so setting active to 0 !!!
API source
