| Commodity |
Description |
Duty Rate |
Status |
Save |
| 3901101020 |
High flow linear low density polyethylene-1-butene / lldpe (cas rn 25087-34-7) in form of powder, with -a melt flow rate (mfr 190 °c/2.16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (astm d 1505) of 0.922 g/cm³ or more, but not more than 0.926 g/cm³ and -a vicat softening temperature of min. 94 °c |
6.00 % |
Exists in SQL |
|
| 3901101050 |
Copolymer of ethylene and 1-butene (cas rn 25087-34-7) with:
-a density (astm d 1505) of 0.924 g/cm³ or more but not more than 0.928 g/cm³,
-a melt flow rate (190 °c/2.16 kg) of 48 g/10 min or more but not more than 52 g/10 min, and
-a peak melting temperature of 120 °c or more but not more than 124 °c |
6.00 % |
Exists in SQL |
|
| 3901101060 |
Copolymer of ethylene and 1-butene (cas rn 25087-34-7) with:
-a density (astm d 1505) of 0.922 g/cm³ or more but not more than 0.926 g/cm³ and
-a melt flow rate (190 °c/2.16 kg) of 18 g/10 min or more but not more than 22 g/10 min |
6.00 % |
Exists in SQL |
|
| 3901101090 |
Other |
6.00 % |
Exists in SQL |
|
| 3901109030 |
Polyethylene granules, containing by weight 10% or more but not more than 25% of copper |
6.00 % |
Exists in SQL |
|
| 3901109090 |
Other |
6.00 % |
Exists in SQL |
|
| 3901201000 |
Polyethylene in one of the forms mentioned in note 6(b) to this chapter, of a specific gravity of 0.958 or more at 23 °c, containing:
- 50 mg/kg or less of aluminium,
- 2 mg/kg or less of calcium,
- 2 mg/kg or less of chromium,
- 2 mg/kg or less of iron,
- 2 mg/kg or less of nickel,
- 2 mg/kg or less of titanium and
- 8 mg/kg or less of vanadium,
for the manufacture of chlorosulphonated polyethylene |
0.00 % |
Exists in SQL |
|
| 3901209000 |
Other |
6.00 % |
Exists in SQL |
|
| 3901300010 |
For cavity filling, for use in certain types of aircraft |
6.00 % |
Exists in SQL |
|
| 3901300020 |
Copolymer of ethylene and vinyl acetate (cas rn 24937-78-8)
-containing by weight 28% or more but not more than 49% of vinyl acetate,
-with a melt flow rate of less than 5g/10 min (190 °c/2.16 kg, astm d1238),
-in the form of pellets
|
6.00 % |
Exists in SQL |
|
| 3901300030 |
Terpolymer of ethylene, vinyl acetate and methacrylic acid (cas rn 26375-31-5) |
6.00 % |
Exists in SQL |
|
| 3901300099 |
Other |
6.00 % |
Exists in SQL |
|
| 3901400010 |
High flow linear low density polyethylene-1-butene / lldpe (cas rn 25087-34-7) in form of powder, with -a melt flow rate (mfr 190 °c/2.16 kg) of 16g/10 min or more, but not more than 24 g/10 min and -a density (astm d 1505) of 0.922 g/cm³ or more, but not more than 0.926 g/cm³ and -a vicat softening temperature of min. 94 °c |
0.00 % |
Exists in SQL |
|
| 3901400030 |
Octene linear low-density polyethylene (lldpe) produced by a ziegler-natta catalyst method in the form of pellets with:
- more than 10% but not more than 20% by weight of copolymer,
- a melt flow rate (mfr 190°c/2.16 kg) of 0.7 g / 10 min or more but not more than 0.9 g / 10 min, and
- a density (astm d4703) of 0.911 g/cm³ or more, but not more than 0.913 g/cm³
for use in the co-extrusion processing of films for flexible food packaging |
0.00 % |
Exists in SQL |
|
| 3901400050 |
Copolymer of ethylene and 1-butene (cas rn 25087-34-7) with:
-a density (astm d 1505) of 0.924 g/cm³ or more but not more than 0.928 g/cm³,
-a melt flow rate (190 °c/2.16 kg) of 48 g/10 min or more but not more than 52 g/10 min, and
-a peak melting temperature of 120 °c or more but not more than 124 °c |
0.00 % |
Exists in SQL |
|
| 3901400060 |
Copolymer of ethylene and 1-butene (cas rn 25087-34-7) with:
-a density (astm d 1505) of 0.922 g/cm³ or more but not more than 0.926 g/cm³ and
-a melt flow rate (190 °c/2.16 kg) of 18 g/10 min or more but not more than 22 g/10 min |
0.00 % |
Exists in SQL |
|
| 3901400090 |
Other |
0.00 % |
Exists in SQL |
|
| 3901903000 |
Ionomer resin consisting of a salt of a terpolymer of ethylene with isobutyl acrylate and methacrylic acid; a-b-a block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35% or less of styrene, in one of the forms mentioned in note 6(b) to this chapter |
0.00 % |
Exists in SQL |
|
| 3901908010 |
For cavity filling, for use in certain types of aircraft |
6.00 % |
Exists in SQL |
|
| 3901908053 |
Copolymer of ethylene and acrylic acid (cas rn 9010-77-9) with
- an acrylic acid content of 18.5% or more but not more than 49.5% by weight (astm d4094), and
- a melt flow rate of 10g/10 min (mfr 125 °c/2.16 kg, astm d1238) or more
|
6.00 % |
Exists in SQL |
|
| 3901908055 |
Zinc or sodium salt of an ethylene and acrylic acid copolymer, with:
- an acrylic acid content of 6% or more but not more than 50% by weight, and
- a melt flow rate of 1g/10 min or more at 190 °c/2.16 kg (measured using astm d1238)
|
6.00 % |
Exists in SQL |
|
| 3901908067 |
Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11% by weight or more |
6.00 % |
Exists in SQL |
|
| 3901908073 |
Mixture containing by weight
- 80% or more, but not more than 94% of chlorinated polyethylene (cas rn 64754-90-1) and
- 6% or more, but not more than 20% of styrene-acrylic copolymer (cas rn 27136-15-8)
|
6.00 % |
Exists in SQL |
|
| 3901908075 |
Terpolymer of ethylene, isobutyl acrylate and methacrylic acid (cas rn 37433-35-5), in the form of pellets |
6.00 % |
Exists in SQL |
|
| 3901908085 |
Terpolymer of ethylene, n-butyl acrylate and carbon monoxide (cas rn 61843-70-7) in the form of pellets |
6.00 % |
Exists in SQL |
|
| 3901908091 |
Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid |
6.00 % |
Exists in SQL |
|
| 3901908092 |
Chlorosulphonated polyethylene |
6.00 % |
Exists in SQL |
|
| 3901908093 |
Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets |
6.00 % |
Exists in SQL |
|
| 3901908094 |
Mixtures of a-b block copolymer of polystyrene and ethylene-butylene copolymer and a-b-a block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35% of styrene |
6.00 % |
Exists in SQL |
|
| 3901908097 |
Chlorinated polyethylene, in the form of powder |
6.00 % |
Exists in SQL |
|
| 3901908099 |
Other |
0.00 % |
Exists in SQL |
|
